Polarized Custom Size Clip-Ons

0 Review(s)

| Questions about this item? Be the first to ask here.

Your Price: $29.95

Part Number:74-2

Shape

Size

Frame Information

Info Printed on Inside of Left Temple Arm:

Info Printed on Inside of Right Temple Arm:

Info Printed on Inside Bridge:

Quantity

Description
Customer Reviews
Fitting Instructions

Gray lens polarized for high glare situations. All colors are seen true.
Good for everyday use in all outdoor activities.
Blocks 100% of potentially harmful UV-A&B rays to 390nm.
Meets or exceeds all applicable FDA/SAA & ANSI Z80.3 standards.
Includes a protective case.
Flat black frame blends with the lenses and will complement any frame color.
Pewter frame standard for Ellipse, Round and Square Shapes.

NOTE: Plastic frames are difficult to fit with a fixed bridge clip-on. We recommend the Glide-Fit Clip-On for plastic frames.
1. Determine the eye size

"A measurement" of your glasses. The eye size will be printed on the inside of either temple arm or the inside of the bridge. It is typically followed by a box or a dash with the next number indicating the bridge width. In the example above, the eye size is 50 and the bridge is 18. You will find either 50[]18 or 50-18 on printed on your glasses. If it unreadable, measure across the lens of one eye at its widest part. The 140 is the temple arm length and not used in clip-on fit.

2. With most metal frames, a clip-on one size large than your frame - in this example 52 in the correct shape - will provide the best fit.

3. To determine the correct shape, measure your glasses with a metric ruler from the top of the frame to the bottom.

This is the "B measurement."

4. Compare your A and B measurement to the charts for the basic shape of your glasses to determine the best fit. The third set of numbers in the chart is the bridge distance.

If the bridge distance of your glasses exceeds the clip bridge distance by more than 1-2mm the clip will not fit correctly. Consider purchasing the Glide-Fit Clip-on.

5. Click on the image of the shape that matches your glasses. Make sure your printer settings are set to 100%, actual size, no scaling of size. Print the templates, place your ruler next to the ruler image to verify the template printed the correct size and compare the fit with the template. Sometimes a different shape will provide a better fit.

6. Copy ALL the information printed on the inside of BOTH temple arms and include after entering the size and shape. We use this to verify the fit selection in our frame database.